Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino

SKU: SEN0213

1,195.00 LE

Shipping calculated at checkout

In stock


The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip which will generate a clear signal from the PR and QT Intervals. Using the Arduino IDE "Serial Plotter" feature, ط¢آ you are also able to view plotted ECG output on ط¢آ PC!

Gravity: Arduino Heart Rate Monitor Sensor (ECG) -DFRobot

To ease the difficult of using this sensor, ط¢آ aط¢آ Gravityط¢آ Interface is adapted to allow plug&play. ط¢آ Theط¢آ IO expansion shieldط¢آ is the best match for this sound senor connecting to yourط¢آ Arduino. As this sensor can work at 3.3V which make it compatible withط¢آ Raspberry Pi,ط¢آ intel edison, joule and curie.ط¢آ 

Analog sensor to monitor heart rate (ECG) with AD8232

NOTE: This product is NOT a medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions.

ط¢آ Gravity Heart Rate Sensor Selection Guideط¢آ 

Name Gravityط£آ¯ط¢آ¼ط¥طŒAnalog ECG Heart Rate Sensor Gravityط£آ¯ط¢آ¼ط¥طŒAnalog/Digital PPG Heart Rate Sensor
SKU SEN0213 SEN0203
IC/Module AD8232 SON1303
Operation Voltage(VCC) 3.3ط£آ¯ط¢آ½ط¥آ¾6V 3.3ط£آ¯ط¢آ½ط¥آ¾6V
Gravity: Analog
(Digital 0ط£آ¯ط¢آ½ط¥آ¾3.3V)
Gravity: Analog/Digitalط¢آ 
(Analog 0ط£آ¯ط¢آ½ط¥آ¾VCC)
(Digital 0ط£آ¯ط¢آ½ط¥آ¾VCC)
Measurement Principle ECGط£آ¯ط¢آ¼ط«â€ Electrocardiogramط£آ¯ط¢آ¼أ¢â‚¬آ° PPGط£آ¯ط¢آ¼ط«â€ Photo Plethysmo Graphyط£آ¯ط¢آ¼أ¢â‚¬آ°
Average Power <10mA <10mA
35*22 mm 28*24 mm
1.ECG method, accurate and stable
2.Three electrodes
3.3.3V/5V compatible
1.PPG method, convenient and fast
2.Analog (pulse wave) & Digital(heart rate), configurable output
3.3.3V/5V compatible

Estimate shipping

You may also like

Recently viewed